三级片在线

contact us >>

Beijing Huiyuan Sanda water treatment equipment Co., Ltd
Hot line: 010-83688022
Tel: 010-88112995
Hand machine: 13301366780
Hand machine: 13621116667
Mail box: zyg @ kusaing.com
Website address: kusaing.com
Address: 4 / F, block B, building 1, No. 18 Longqing street, Beijing Economic and Technological Development Zone
Address of Shandong Branch: 169 Dexin street, national high tech Industrial Development Zone, Yucheng City, Shandong Province

Pure water knowledge

home page  >  Pure water knowledge

Advantages and disadvantages of equipment for preparation of pharmaceutical purified water

Release date: November 26, 2019 23:36:37

Advantages of purified water equipment

1. The structure design should be simple, reliable and easy to disassemble.

2. In order to facilitate the disassembly, replacement and cleaning of parts, the actuator design should adopt standardized, universal and systematic parts as far as possible.

3. The inner and outer surface of the equipment should be smooth and flat without dead angle, easy to clean and sterilize. The surface of parts shall be treated with chromium plating to prevent corrosion and rust. Avoid using paint on the outside of the equipment to prevent spalling.

4. Low carbon stainless steel or other proven materials that do not pollute the water quality shall be used for the preparation of purified water equipment. The equipment for preparing purified water should be cleaned regularly and the cleaning effect should be verified.

5. The material in contact with water for injection must be high-quality low-carbon stainless steel or other verified materials that do not pollute the water quality. The equipment for preparing water for injection should be cleaned regularly and the cleaning effect should be verified.

6. The storage period of purified water should not be longer than 24 hours, and the storage tank should be made of stainless steel or other materials that have been verified to be non-toxic, corrosion-resistant and do not exude polluting ions. Hydrophobic filter with no fiber shedding should be installed to protect the vent. The inner wall of the storage tank shall be smooth, and there shall be no dead angle and sand hole in the connecting pipe and welding seam. The sensor which will not form stagnant water pollution should be used to display the parameters such as liquid level, temperature and pressure. The storage tank should be cleaned, disinfected and sterilized regularly, and the cleaning and sterilization effect should be verified.

In order to ensure the safety of the whole system, many barriers have been set up, and ultraviolet sterilizer will be set at the water consumption point, and the sterilization rate can be close to 100%.